20mm Solid Deformed Bar
20-T500
Quantity:
Solid deformed bar is made of hot rolled reinforcing bar, which has rib deformation has a strandard rolled thread at one end.
Dimensions & mechanical properties
| Bar core diameter | 19.5mm | ||
| Major bar diameter | 23mm | ||
| Cross section area,A | 300mm2 | ||
| Rolled thread | M24x3.0mm Pitch | ||
| Minimum | Typical | ||
| Yield strength | 500MPa / 150kN | 540MPa / 160kN | |
| Tensile strength | 540MPa / 160kN | 635MPa / 190kN | |
| Elongation,at Fracture | 15% | 20% | |
Accessories: Bearing plate, Nut, Domed ball, Anti-friction washer.
Length: 450-3000mm as specified.
Package: 100pcs —300pcs per bundle as specified
Key Features
- The Solid Deformed Bar is manufactured from hot rolled reinforcing bar having rib deformations generally in a"herringbone"form.
- The Solid Deformed Bar has a standard thread roll formed at one end.
- The Solid Deformed Bar is usually fully encapsulated with resin anchors, but can be effectively used with cementitious grouts.
- Corrosion protection may be provided by hot dip galvanizing or alternative coatings.
Recommend Products
